Tagged knit fabric

Colette Mabel

I’m sick of jeans that don’t fit comfortably. The rise is always too low, and I’m always having to either wear a belt (which is uncomfortable) or pull my pants up every few minutes (also uncomfortable, and not very convenient). In the case of the one pair with a nice, just below the navel rise, the fabric doesn’t have enough memory (2% spandex simply is not enough), so they stretch out of shape after an hour or so, which results in needing to pull my jeans up constantly. No thank you.

I am eventually going to get around to making myself a pair or two of jeans that actually fit, but that’s going to be quite a project, so in the meantime, because pants are STUPID, I have made myself some comfortable skirts that I can wear with tights.

I thought about drafting a pattern, however as my eldest would say, “it would be easy…but, lazy”. I decided to go with the Colette Mabel skirt pattern, with a minor modification… I don’t like my skirts super short, so I added 3″ to the length of the mini skirt. I don’t usually sew with knits, which meant I had very little in my stash, so I had to go to the fabric store. I found two fabrics that I liked, which will go with everything… One was a solid black knit, and the other was a heathered charcoal colour.

DSC_4699After taking my measurements, I determined that I landed exactly in the range for the large size. I made the black skirt first. First lesson with this pattern is that it doesn’t have standard 5/8″ seam allowances, so my usual habit of snipping my notches into the seam allowance meant that I had some fussing to do at the notches, since I snipped too far and ended up with tiny holes everywhere there was a notch. Doing notches this way makes cutting your fabric go much faster, but the time I spent fiddling with the stitching negates any time I saved cutting. Lesson learned: read the instructions before cutting, in case the seam allowances are not standard.

DSC_4698I didn’t feel like making the charcoal right away, so I nabbed this funky, retro heathered print from my stash. I bought it at Dressew a few months ago, from the clearance section. I think it was only $2 per meter, and I couldn’t resist it. I figured if I hated it as a skirt, I could donate it to charity without feeling like it was money wasted. In the end, I rather like it, so long as I balance it with dark tights and a dark top.

DSC_4700After actually wearing the two skirts, I decided that the large was just a touch too big, so I trimmed the pattern down to the medium size and cut the charcoal fabric. The fit is much better, and after making two skirts already, I didn’t need to refer back to the instructions, and I had all of the bugs worked out.

DSC_4701Because my black and charcoal fabrics were 60″ wide, there was quite a bit left over. Not enough for another skirt, but there was plenty to make a colour block skirt! I redrafted the back piece, and cut the centre pieces as well as the waistband out of the charcoal, and the side pieces in black. Talk about making the most of your yardage!

The last two skirts were done assembly-line style, because I could use the same thread for both. It only took me about an hour and a half to make the two, plus cutting time.

As a bonus, I scored on sweater tights at The Bay this week, because they’re clearing them out for the season, so I have plenty of options for comfy tights to wear with my comfy skirts! It was fairly inexpensive too. I spent only about $15 CAD on fabric for four skirts. The pattern is a bit pricey considering that the Canadian dollar is so low, but because I can as many skirts as I want, I think in the end it is money well spent.